Birmingham Home of Metal Brass Makers Founders

Typically, you’ll find metal content stamps near the clasp on necklaces and bracelets, on the inside surface of rings, and on the backs of earrings, pins, and brooches. Legal Requirements for Metal Stamps on Jewelry Although many people assume that jewelry manufacturers are required to stamp their pieces with metal content, this is not always the case. In fact, according to the Jewelers Vigilance Committee , which is the legal compliance authority for the jewelry business, the standard is actually a little less clear. These are the legal requirements: Jewelry manufacturers in the United States must inform the consumer about precious metal content, but the content doesn’t actually have to be stamped on the piece. It can be on the appraisal accompanying the item, on a hang tag or packaging component, or on the invoice or receipt for the purchase. Vintage ring with maker’s mark and platinum marking If the manufacturer does stamp the piece with metal content, they are required to place their trademark or the retailer’s trademark right next to the metal content stamp. Legally, this assures the consumer that the company making or selling the jewelry will stand behind the metal content they are identifying. There is no legal stamping requirement for non-precious metals, such as tungsten, stainless steel, and titanium. Types of Metal Markings You may notice the following metal stamps or markings on your jewelry:

Association of Small Collectors of Antique Silver

It used to be thought that the earliest metal thimbles found in Britain dated to the Roman period, but the present view is that they are all very much later. In fact, although examples dating as early as the ninth or tenth century AD have been found at Corinth and in Asia Minor, the use of thimbles in this country did not become widespread until the fourteenth century. They often have one or two circumferential grooves at their base, but only a very small proportion of them have any other form of decoration.

Until the beginning of the fifteenth century, the majority were of a shallow cup shape, reflected by their present-day nicknames of acorn-tops, skeps or beehive thimbles. A 14th century thimble hammered from sheet metal as indicated by internal lapping , but nevertheless with a small hole in the crown. UKDFD One purpose of the hole may have been to facilitate support of the core during the casting process, but hammered thimbles with this feature are also known Fig.

According to the Goldsmiths’ Hall, Foster Lane, London, the mark of Catherine Anne Cockerell, first registered in takes the form of the letters C.A.C. within an oval. An English jewelry maker who worked from the ‘s to , she was the daughter of .

The list consists of designers and maker’s marks that have been difficult to find in reference materials so far. When information is found it will appear with credit given to the person who provided it. Thank you, in advance, for your assistance. US silver companies such as Gorham and Tiffany often used both marks in the late ‘s.

Britain never used a standard less than Hence why British silver is sought after pre hundreds. Britain would not accept any standard below as silver. Most European countries up until s used s. Places like Egypt still today only use silver information provided by Vanessa Paterson. Retro Gallery I would just like to correct one point. The lowest grade is 18 karat. In silver jewelry you might find less grade depending on the design.

Efineantiques Fine Porcelain and Table of Fine Porcelain Marks

Every effort is made to have accurate information, but we do not guarantee the accuracy of any information and you use the information presented here at your own risk. On some pages we use third-party advertising companies to serve ads when you visit our website. These companies may use information not including your name, address, email address, or telephone number about your visits to this and other websites in order to provide advertisements about goods and services of interest to you.

If you would like more information about this practice and to know your choices about not having this information used by these companies, click here. We collect shipping information on purchases from the STORE which is used solely for shipping; we collect some information on various submissions which is used to verify that the submission is made by the person claiming to make it and for no other purpose.

We rarely collect information from anyone.

The first date codes, found for example on the Vacumatics, consists of two digits, the first one denoting the quarter of production, the second denoting the production year. Hence a “47” marking on a ‘s pen indicate that the pen was produced in the fourth quarter of , not , which is .

The company soon outgrew its quarters and constructed a larger building, which still stands on Bridge Street, Shelton, in near the Housatonic River, overlooking Derby. A number of additions were added in subsequent years. The original Canal Street building was razed when the railroad was built through Shelton in The company made toilet articles, mirrors, combs, clocks, brushes, table and flatware, tea sets, children’s cups, loving cups trophies , candlesticks, fruit baskets, dishes, basically anything which was plated by or made of silver.

Special orders were constantly commissioned as well. The factory manufactured items for the Sperry and Hutchins trading stamp stores. The Company was noted for its large line of silver plated toilet ware and an economical line of plated hollowware sold under the popular trademark of the Victor Silver Plate Company. A considerable amount of silver was shipped to South America. The logo at the time featured an anchor, often with the words “Derby Silver Company” or its initials surrounding it.

In , the plant merged with the International Silver Company, a consortium of Connecticut silver companies. A victim of the Depression, the plant closed in The building had served as an automobile muffler factory, and during World War II manufactured bombsight optics. In it was bought by the Sponge Rubber Products Company. The large smokestack that served the Silver Company was torn down in October of

Silver Date Marks

The marking is invariably produced by die stamping, which is an inherent part of the manufacturing process, and backmarks produced in this way continue to be used to the present day. The list that follows identifies British manufacturers and the backmarks they used from the earliest ones recorded until about the middle of the twentieth century. They have been collated from a large number of sources over a long period of time, both documentary and from the buttons themselves, most of which have been recovered by metal detectorists.

A Chinese Gilt Copper & Enamel Budai – 老虎古董 – 购买中国古董 – Tiger Antiques A Chinese Gilt Copper & Enamel Budai – 老虎古董 – 购买中国古董 – Tiger Antiques.

Order of Leopold I, early Knight class in civil Division. Very nice example manufactured by C. We prefer to simply call it ‘Buls type 2’ crown. Other than the crown, there are several interesting variations on Buls’s crosses – especially the appearance of the lion in the centres. Many forms are known and we believe that crowned lions belong in the earliest period of firm’s production line. Presence of well detailed manufacturer’s mark would likely indicate earlier vintage of the production also.

This example has en exceptionally well detailed mark B with wreath beneath , struck to both, the wreath ties and the suspension eyelet. Silver hallmark also clearly impressed on the ties. This hallmark was no longer used after yet occasionally seen on later crosses since couple of other firms purchased Buls’s remaining blanks circa None of those post crosses should in theory bear the mark of the manufacturer and the lions become quite rough in appearance often very flat and featureless.

It would be safe to date this particular cross around Condition is exceptional, just a few minor chips to the tips of the cross. Beautiful patina is evident.

Financial Astrology by Mahendra Sharma

Firstly to sell silver you need to know the metals quality and its age. The quality and age of silver can be assessed by checking the silver hallmarks. If you do not have a hallmark guide, have a look at our Gold and Silver hallmarks guide for your computer or mobile device. When you have understood your metals age and purity you can begin to find other ways to sell silver. The Purity and age of Silver can be found by examining any hallmark on the metal.

If you are unsure of the value of your silver items, an independent valuation from a jeweller or expert is a good idea.

Hallmarking for precious metals at the Goldsmiths Company Assay Office in London. We have been assaying precious metals since Every Mark Matters. The Goldsmiths’ Company Assay Office is where hallmarking began. UK Compulsory and Traditional Hallmarks. UK Hallmarks; Convention & Other Legal Marks.

There are a number of methods by which a rifle can be dated, or at least bracketed between certain years of manufacture. For the latter, dates of introduction of military arms can be located within the Government “List of Changes” LoCs as can dates of obsolescence and of modification or upgrade to later marks. You may not necessarily find specific date information within the text of particular pages, but often the images of advertisements or catalogue entries contain some dating ‘give-away’, such as the year in which a particular rifle achieved a notable competition score by someone, but which data is in graphic format and therefore not “searchable” by a text search engine.

Do not briefly glance over a page and assume that the information you require is not there. It may not be immediately obvious, but careful observation may provide you with the information for which you are looking. Such research is a major part of the joy of owning, collecting and shooting classic or historic rifles. Anschutz target rifles fall into this category, and their system is given on the page for these rifles.

Dating Antique Silver Hallmarks & Silver Origins

This was one of the biggest cutlery firms in Sheffield by He died in Norfolk Street on 9 December , aged 59, but his son William Howson took over his father’s interests. The capital of the business, which was based at No.

Search the world’s information, including webpages, images, videos and more. Google has many special features to help you find exactly what you’re looking for.

The mark used was a profile portrait of the reigning monarch’s head. The use of this mark was abolished in Its purpose was to establish when a piece was presented for assay or testing of the silver content. The mark letter changed annually in May, the cycles of date letters were usually in strings of 20 and each cycle was differentiated by a changing of the font, letter case and shield shape.

Originally, makers’ marks were pictograms, but by the beginning of the 17th Century it had become common practice to use the maker’s initials. A letter “F” in an oval cartouche was stamped alongside the regular hallmarks, the maker’s mark being that of the British importing firm sponsor’s mark. Beginning in and new system was instituted in which each assay office stamped its own symbol as the import mark, this replaced the town mark.

The lion passant mark was replaced by a numerical standard mark. Unchanged were the required date letter and sponsor’s mark. Items bearing British Import marks will sometimes have additional marks from the country of origin, sometimes not.


Proof Marks — dating your gun Why have proof laws? Proof marks from a pin-fire showing marks; the first time the bore was stamped at proof. This gun shows proof marks only used between and Proof marks will sometimes be found on the tubes like this, but more commonly on the flats.

The Oldcopper Website (c) Vin Callcut Small extracts can be used with acknowledgements to ” website. Helpful comments are very welcome. Nearly pages of information in this website. Use the left hand column menu to get to all the listed .

Birmingham – Home of Metal – This page includes a selection of manufacturers of brass and copper items mostly for domestic use. During this time there were about 3, makers whose names appear somewhere in the annual directories. The names mentioned are mostly those who marked their products, some of which may still be found second hand. Other names have come to light as I skimmed through the books of Registered Designs at the National Archives.

If more information is needed on particular firms the best initial source will be the Birmingham Central Library. When a year date is shown it is the year of the commercial directory used and is just one of the years in during which the company operated. The Birmingham coat of arms is surmounted by an arm and hammer, simbolic of the industries that made the city prosper. Corrections and more information on any of these firms will be welcomed and acknowledged when used.

Acme Albion Lamp Co. Armfield Birmingham, Armfield, Edward. Wood Lane, Bromford, Erdington, Birmingham. No family connection yet confirmed with:

How To Interpret A Hallmark